Learn The Correct Maintenance Knowledge of Air Tools

Air tools are generally relatively small, the advantage is that it is easy to use, not suitable for loss, and the main thing is to save money. The service life of Air tools is very long, but if the use and maintenance methods are not correct, you will find that your air tools often have one or more problems. In this situation, many people complain about this, but it is very strange that few people complain about themselves even if they are used badly. In order not to complain about air tools, they should learn the air tool maintenance knowledge correctly.

Air tool air supply: Use 90PSI (6.2Bar) clean, dry air supply tool. Too high air pressure will quickly reduce the life of the tool. Use the appropriate size parts, conduit and hose connection tools marked in the tool chart. If using an air pressure regulator, set the air pressure at an output pressure of 0.62 MPA.

Air tools use specific steps to connect air tools to the air production line. Set the air pressure. The air production line must be equipped with an air lubricating oil device. If the air lubricating oil device is unqualified or not available, the tool should be subjected to the following daily maintenance: after continuous work for 3 to 4 hours, separate the tool from the air source and drip from the air inlet of the tool Put 7-8 drops of high purity light engine oil with low viscosity, then connect the air pipe, open the air source, and blow the oil into the cylinder. Conditional users and the working intensity is relatively full load, it is recommended to install a small oil injector at the intake joint. Usually 30-40 days, the air compressor and the oil-water separator need to be regularly drained and cleaned to ensure that the air entering the tool is clean and dry.

Advantages of using Air tools: gas is easy to obtain, and the working pressure is low. The used air can be discharged on site without recycling pipes; the viscosity of the gas is small and the flow resistance loss is small, which is convenient for centralized gas supply and long-distance transportation; air actuator High movement speed; the air system has strong adaptability to the environment, can work reliably in a wide temperature range, humid and dusty environment, a little leakage will not pollute the environment, there is no risk of fire and explosion, safe use; simple structure, maintenance Convenient, low cost; long service life of air components; air component's output output is smaller than hydraulic pressure, faster movement, strong adaptability, can work in harsh environments of easy, explosive, heavy, wet, impact, and does not pollute the environment , Long working life, simple structure, easy maintenance, and low price.

If you want to know more information, please contact us: airless paint sprayer.